Michem® In-Line Primer 040
Brand Family Overview
FGLASS™ is a versatile family of fiber sizings and film formers used in the manufacturing of both glass fiber and carbon fiber. It is suitable for both chopped strand and continuous fiber applications.
See more FGLASS products.Usage
Imparts a print-receptive surface to synthetic substrates to improve the ink transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available as options on both the WS6000 and WS6600 presses. The primer improves the surface of a wide range of synthetic substrates. This product possesses good stability to light and is resistant to yellowing.
Description
Primer for Digital Printing
Performance Attributes
This product is used in many applications including the following:
| Application | Properties Imparted |
|---|---|
| HP Indigo Solutions | Applicator - Indigo ILP station, OEM - Indigo ws6000, Substrate - film |
See more products recommended for HP Indigo Solutions.
Physical Properties
These physical properties are typical but should not be considered specifications.
| Appearance | Yellow to brown, opaque liquid |
|---|---|
| pH | 8.0 - 9.0 |
| Percent Non-Volatile | 25.0 - 26.0 |
| Brookfield Viscosity (cps, mPa·s) | <30 |
| Spindle Number | 1 |
| RPM | 60 |
Site of Manufacture (and Product Code)
CIN (ILP040)
AUB (ILP040.E)
SNG (ILP040.S)
Application Data
Michem® In-Line Primer 040 is designed specifically for use in the in-line priming unit of an HP Indigo WS6600 printing press. When run as instructed by HP Indigo on synthetic substrates, the ILP unit will apply the correct amount of primer to achieve optimal ink adhesion and press performance. EZ Cup Viscosity - #2 Cup, 18-20 seconds. Do not dilute.