Michem® Prime 8515
Brand Family Overview
Michem® Coat water-based coatings are selected primarily for grease and oil resistance. Other benefits include water resistance, release, coldset gluability, hot melt gluability, recyclability, and compliance with specific food contact regulations.See more Michem Coat products.
Michem® Prime 8515 is a low temperature heat seal coating for plastic films for flexible packaging applications. It is optimized to give high hot tack over a wide temperature range. It should be used with the addition of a carnauba wax emulsion to control the coefficient of friction (typically 2 to 4% by weight) e.g. Michem® Lube 160PFP.E.
water based heat seal coating
This product is used in many applications including the following:
|Heat Seal Coatings||Substrate - film|
See more products recommended for Heat Seal Coatings.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 9.5|
|Brookfield Viscosity (cps, mPa·s)||<400|
Site of Manufacture (and Product Code)
Michem® Prime 8515 can be applied via flexo , gravure or roll coater.