Michem® In-Line Primer 040
Brand Family Overview
Michem® Emulsion is a versatile family of products that adds value to a wide range of markets. Markets include paint & coatings, fiberglass, inks & OPVs, floor care, wood finishes, automotive care products, building products, carpets, die lubricants, fruit & vegetable coatings, textiles, and urethane foam.See more Michem Emulsion products.
Imparts a print-receptive surface to synthetic substrates to improve the ink transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available as options on both the WS6000 and WS6600 presses. The primer improves the surface of a wide range of synthetic substrates. This product possesses good stability to light and is resistant to yellowing.
Primer for Digital Printing
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - Indigo ILP station, OEM - Indigo ws6000, Substrate - film|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|Appearance||Yellow to brown, opaque liquid|
|EZ Cup Viscosity (s)||18 - 20|
|pH||8.0 - 9.0|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||Stable after 5 Cycles|
|Percent Non-Volatile||25.0 - 26.0|
|Specific Gravity||1.00 - 1.02|
|Brookfield Viscosity (cps, mPa·s)||<30|
Site of Manufacture (and Product Code)
Michem® In-Line Primer 040 is designed specifically for use in the in-line priming unit of an HP Indigo WS6600 printing press. When run as instructed by HP Indigo on synthetic substrates, the ILP unit will apply the correct amount of primer to achieve optimal ink adhesion and press performance. EZ Cup Viscosity - #2 Cup, 18-20 seconds. Do not dilute.