Michem® Prime 5931
Brand Family Overview
Michem® Emulsion is a versatile family of products that adds value to a wide range of markets. Markets include paint & coatings, fiberglass, inks & OPVs, floor care, wood finishes, automotive care products, building products, carpets, die lubricants, fruit & vegetable coatings, textiles, and urethane foam.See more Michem Emulsion products.
Provides improved adhesion to polyolefin substrates and also exhibits excellent adhesion to paper, metallic and polymeric substrates as well as glass and polyester scrim. It can serve as a tie coat or primer and increases printability on metallic and polymeric substrates. It can be used as a heat sealable coating on most polymeric films, paper and foil. Patents Pending.
Modified ethylene acrylic acid dispersion
This product is used in many applications including the following:
|Cable & Cordage||adhesion promotion, heat seal|
|Textiles & Leather||adhesion promotion, heat seal|
|Fiber Sizing||PE compatible|
|Inks||adhesion promotion, chemical resistance|
|Overprint Varnishes||adhesion promotion, chemical resistance|
|Nonwovens||heat seal for binders|
See more products recommended for Cable & Cordage.
See more products recommended for Textiles & Leather.
See more products recommended for Fiber Sizing.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Nonwovens.
These physical properties are typical but should not be considered specifications.
|Appearance||White translucent liquid|
|EZ Cup Viscosity (s)||8 - 13|
|pH||8.0 - 10.0|
|Shelf Life (mo)||24|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||27.5 - 29.0|
|Recommended pH Range||>7|
|Specific Gravity||0.99 - 1.01|
|Brookfield Viscosity (cps, mPa·s)||<100|
Site of Manufacture (and Product Code)
Michem®Prime 5931 can be applied by flexographic or rotogravure coating methods. A typical application rate of 1-2 gsm dry coating weight is recommended for most heat seal applications. As a tie coat or print primer application rates of 0.2 to 0.5gsm are usually sufficient. EZ Cup Viscosity = 8 - 13seconds, #3 Cup.