Brand Family Overview
Michem® Guard waterborne dispersions add optimum abrasion/mar resistance, and slip and block resistance without the use of solvents. Some also provide a matting effect for a more natural appearance.See more Michem Guard products.
A water based coating designed to provide good water beading and resistance to corrugated board while being cold set gluable with most adhesives.
Water beading, water resistant, gluable coating
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||10.0 - 12.5|
|Percent Non-Volatile||29.0 - 31.0|
|Brookfield Viscosity (cps, mPa·s)||100 - 600|
Site of Manufacture (and Product Code)
HydraBan® 420 can be applied in-line on the corrugator from the wet or dry end, with a rod or blade coater, or offline. It can also be applied by flexo.