Michem® Prime 4990R
Brand Family Overview
Michem® Shield waterbased polyethylene emulsions are an effective and inexpensive way to improve the performance of OPVs, and is FDA approved. Enhanced properties include excellent rub resistance, good gloss, re-coatability, and water resistance.See more Michem Shield products.
Provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings.
Ethylene acrylic acid dispersion
This product is used in many applications including the following:
|Cable & Cordage||adhesion promotion, heat seal, water resistance|
|Heat Seal Coatings||metal, Substrate - paper|
|Inks||adhesion promotion, chemical resistance|
|Overprint Varnishes||adhesion promotion, chemical resistance|
See more products recommended for Cable & Cordage.
See more products recommended for Heat Seal Coatings.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Thermal Transfer.
These physical properties are typical but should not be considered specifications.
|pH||7.8 - 8.8|
|Emulsifier Charge||Ammoniated dispersion|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||32.0 - 35.0|
|Recommended pH Range||>7|
|Specific Gravity||0.98 - 1.00|
|Brookfield Viscosity (cps, mPa·s)||200 - 850|
Site of Manufacture (and Product Code)
Handle in accordance with good industrial hygiene and safety practice.