Michem® Emulsion 71731MOD
Brand Family Overview
Micryl™ waterbased coatings offer water and grease resistance with exceptional flexo runnability. They are applied over ink as protective, rub-resistant finishes, and also used as low-cost, heat-resistant overprints for porous substrates.See more Micryl products.
Designed to provide release in industrial molding applications.
Anionic paraffin emulsion
This product is used in many applications including the following:
See more products recommended for Urethane Foam.
These physical properties are typical but should not be considered specifications.
|Appearance||White, low viscosity liquid|
|pH||8.5 - 9.5|
|Shelf Life (mo)||6|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||30.0 - 32.0|
|Recommended pH Range||>7|
|Specific Gravity||0.96 - 0.98|
|Brookfield Viscosity (cps, mPa·s)||<200|
Site of Manufacture (and Product Code)
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.