Michem® Emulsion 93235
Brand Family Overview
Micryl™ waterbased coatings offer water and grease resistance with exceptional flexo runnability. They are applied over ink as protective, rub-resistant finishes, and also used as low-cost, heat-resistant overprints for porous substrates.See more Micryl products.
This phenol free additive is best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in floor polish formulations as well as mar resistance and shine in car polish formulations.
Nonionic polyethylene emulsion
This product is used in many applications including the following:
|Textiles & Leather||lubricity for needle and thread, scuff resistance and feel|
|Automotive Care||mar resistance|
|Building Paints||block resistance, lubricity, mar resistance|
|Industrial & Institutional||abrasion resistance, buffability, slip resistance|
|Inks||block resistance, rub resistance, scratch resistance|
|Overprint Varnishes||block resistance, rub resistance, scratch resistance|
|Gloves||block resistance, release|
|Industrial Wood & Plastic||abrasion resistance, block resistance, lubricity, scratch resistance|
|Thermal Transfer||mar resistance, release|
|Exterior Wood Protection||block resistance, durability, scratch resistance|
See more products recommended for Textiles & Leather.
See more products recommended for Automotive Care.
See more products recommended for Building Paints.
See more products recommended for Industrial & Institutional.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Gloves.
See more products recommended for Industrial Wood & Plastic.
See more products recommended for Thermal Transfer.
See more products recommended for Exterior Wood Protection.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 10.5|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||34.5 - 35.5|
|Recommended pH Range||>7|
|Specific Gravity||0.99 - 1.01|
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)
Avoid contact with eyes. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.