Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Used for sizing of polyamide reinforcements (including glass and carbon fiber). It can be used by itself or as an additive to enhance the performance of polyurethane-based sizing. This product is APE free.
Ethylene Maleic Anhydride Copolymer solution
This product is used in many applications including the following:
|Fiber Sizing||chopped strands, continuous fiber, hydrolysis resistance, PA compatible|
See more products recommended for Fiber Sizing.
These physical properties are typical but should not be considered specifications.
|pH||2.1 - 5.0|
|Percent Non-Volatile||39.0 - 41.0|
|Recommended pH Range||<7|
|Brookfield Viscosity (cps, mPa·s)||<1000|
Site of Manufacture (and Product Code)
Handle in accordance with good industrial hygiene and safety practice.