Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
An APE-free sizing for fiberglass for LFT and carbon fiber with excellent bond strength.
Nonionic polypropylene dispersion
This product is used in many applications including the following:
|Fiber Sizing||chopped strands, continuous fiber, impact resistance, PP compatible, slip and lubricity|
See more products recommended for Fiber Sizing.
See more products recommended for Nonwovens.
These physical properties are typical but should not be considered specifications.
|Appearance||Translucent, light yellow/tan liquid|
|pH||8.5 - 10.5|
|Emulsifier Charge||Anionic / Nonionic|
|Percent Non-Volatile||38.5 - 41.0|
|Recommended pH Range||>7|
|Brookfield Viscosity (cps, mPa·s)||50 - 1000|
Site of Manufacture (and Product Code)
Small particle size PP sizing
Avoid contact with eyes. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.