Michem® Emulsion 48040M2
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Provides excellent anti-blocking and release properties for building paint, industrial molding and industrial wood applications.
Nonionic microcrystalline wax emulsion
This product is used in many applications including the following:
|Building Paints||block resistance, release|
|Industrial Wood & Plastic||block resistance, lubricity|
|Die Lubes & Mold Releases||mold release|
|Exterior Wood Protection||release|
See more products recommended for Building Paints.
See more products recommended for Industrial Wood & Plastic.
See more products recommended for Die Lubes & Mold Releases.
See more products recommended for Exterior Wood Protection.
See more products recommended for Urethane Foam.
These physical properties are typical but should not be considered specifications.
|Appearance||Off-white, opaque liquid|
|Shelf Life (mo)||24|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||39.5 - 40.5|
|Recommended pH Range||1 - 12|
|Specific Gravity||0.96 - 0.98|
|Brookfield Viscosity (cps, mPa·s)||<200|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.