Michem® Emulsion 52137
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Provides lubricity and is effective as a high temperature mold release for metal dies.
Nonionic polyethylene emulsion
This product is used in many applications including the following:
|Die Lubes & Mold Releases||lubricity, mold release|
See more products recommended for Die Lubes & Mold Releases.
These physical properties are typical but should not be considered specifications.
|Appearance||Light yellow, translucent liquid|
|pH||8.5 - 9.5|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||36.5 - 37.5|
|Recommended pH Range||2 - 12|
|Specific Gravity||0.98 - 1.00|
|Brookfield Viscosity (cps, mPa·s)||100 max|
Site of Manufacture (and Product Code)
Avoid contact with eyes. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.