Michem® Emulsion 52830
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Provides water resistance for stucco coatings as well as release for anti-grafitti coatings.
Anionic polyethylene wax emulsion
This product is used in many applications including the following:
See more products recommended for Concrete.
These physical properties are typical but should not be considered specifications.
|Appearance||Amber, translucent liquid|
|pH||8.8 - 9.8|
|Shelf Life (mo)||24|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||29.5 - 30.5|
|Recommended pH Range||>7|
|Specific Gravity||0.95 - 0.97|
|Brookfield Viscosity (cps, mPa·s)||30 - 100|
Site of Manufacture (and Product Code)
Handle in accordance with good industrial hygiene and safety practice.