ProHere® L 90001
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Imparts lubricity and contributes to water resistance to metal coatings without affecting gloss.
This product is used in many applications including the following:
|Can & Coil||lubricity, water resistance|
|General Metal||enhanced lubricity, water resistance|
|Industrial Maintenance||water repellence|
See more products recommended for Can & Coil.
See more products recommended for General Metal.
See more products recommended for Industrial Maintenance.
These physical properties are typical but should not be considered specifications.
|Appearance||Amber, translucent liquid|
|pH||9.4 - 10.4|
|Percent Non-Volatile||29.5 - 30.5|
|Recommended pH Range||>7|
|Brookfield Viscosity (cps, mPa·s)||50 max|
Site of Manufacture (and Product Code)