ProHere® L 90104
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Imparts scratch and abrasion resistance to metal coatings, as well as anti-slip properties.
Nonionic polypropylene emulsion
This product is used in many applications including the following:
|General Metal||abrasion resistance, increased CoF, reduced slip, scratch resistance, torque/tension control|
See more products recommended for General Metal.
These physical properties are typical but should not be considered specifications.
|Appearance||Amber, translucent liquid|
|pH||7.5 - 9.0|
|Emulsifier Charge||Anionic / Nonionic|
|Percent Non-Volatile||39.5 - 40.5|
|Recommended pH Range||>7|
|Brookfield Viscosity (cps, mPa·s)||120 max|
Site of Manufacture (and Product Code)