ProHere® U 10002
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Polymer used in the formulation of fast drying, fast hardening, abrasion resistant top coats for metal coatings.
Water-based polyurethane acrylic hybrid system
This product is used in many applications including the following:
See more products recommended for General Metal.
These physical properties are typical but should not be considered specifications.
|pH||7 - 9|
|Minimum Film Forming Temperature (°C)||30|
|Percent Non-Volatile||34.0 - 36.0|
|Brookfield Viscosity (cps, mPa·s)||20 - 500|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.