Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
A Kosher approved coating which provides excellent water resistance, moisture barrier, oil/grease resistance, and frozen meat release. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coated wax applications, poly laminated board, and plastic bags.
MVTR and meat release
This product is used in many applications including the following:
|Perishables||grease & oil resistance, MVTR, release, water resistance|
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|Percent Non-Volatile||39.0 - 41.0|
|Brookfield Viscosity (cps, mPa·s)||100 - 600|
Site of Manufacture (and Product Code)
VaporCoat® 2202 is best applied using a rod coater. If applied over a base coat, excellent performance can be achieved at application rates of 2-3 wet lbs./MSF.