Brand Family Overview
Abrasion-resistant Nomar® coatings eliminate the common abrasion that occurs between the inside of the shipping container and the packaged item.See more Nomar products.
Provides very good abrasion, water, and blocking resistance and fast hardness development for floor coatings, parquet lacquers and industrial coatings.
Water-based polyurethane - acrylic hybrid system
This product is used in many applications including the following:
|Industrial & Institutional||abrasion resistance, hardness, water resistance|
|Industrial Wood & Plastic||abrasion resistance, hardness, water resistance|
See more products recommended for Industrial & Institutional.
See more products recommended for Industrial Wood & Plastic.
These physical properties are typical but should not be considered specifications.
|pH||7.0 - 9.0|
|Minimum Film Forming Temperature (°C)||30|
|Shelf Life (mo)||12|
|Percent Non-Volatile||34.0 - 36.0|
|Brookfield Viscosity (cps, mPa·s)||20 - 500|
Site of Manufacture (and Product Code)
This dispersion is compatible with most common additives, pigments and pigment preparations and can be combined with other emulsions. Due to the variety of products in the market, compatibility and storage stability have to be tested from case to case. Polyurethane thickeners are highly recommended but most commercial thickeners can be used. Due to the low minimum film forming temperature of this emulsion it is not mandatory to add coalescing agents. For application properties of the final product it might be helpful to add co-solvents like butyl glycol, butyl diglycol, Texanol or glycol ether. For Storage and Safety information see Material Safety Data Sheet.