Tubes and cores, gypsum board, packaging for corrodible metal components (auto parts, etc.), tier sheets, and numerous other industrial applications rely on Michelman coating technology. Our solutions include release, anti-corrosion vapor barrier, moisture vapor barrier, low slip, and many other effects. Michelman's experience in developing solutions to these challenges was pioneering and continues to grow.
Alumina based, nonskid coating designed to reduce the slipperiness of shipping containers by providing excellent slide angles. With a low pH it does not resolubilize ink and can prevent ink smearing. This product is gluable with both hot melt and cold set glues.
Silica based sprayable nonskid coating that provides excellent slide angles, is easy to clean and is gluable with hot melt and cold set adhesives.
A high solids sprayable nonskid coating that provides excellent slide angles, is easily cleanable and hot melt and cold set gluable.
Provides high levels of water resistance and good moisture resistance for kraft paper. It protects food products from excessive moisture, freezer burn, and sticking. When diluted for mill application, it is an economical sizing agent. Gluability with hot melt adhesives is excellent, but cold set gluing is not recommended.
This fully formulated, flexo appliable nonskid coating is designed for kraft, mottled and bleached substrates.
Michem® Coat 218CI4 AFN is a contact type corrosion inhibitor. It is used to protect electrical components, metal parts, and sensitive papers. It must come in direct contact with the corrodible surface in order to protect it. It is gluable with many water based and hot melt adhesives.
A repulpable, printable, and cold set gluable coating optimized for water resistance and intermediate MVTR protection. Common uses include packaging for produce and meats, or anywhere packaged goods require protection from water or moisture vapor. It can be used alone as a single bump, or can be an ideal base coat for other barrier-enhancing Michelman coatings.
A lower solids, economical, one component coating that provides superior release for a variety of "sticky" products such as hot asphalt. Because it is a one component release system, it eliminates mixing and leftover material disposal. This product is neither hot melt nor cold set gluable.
An easy-to-use one component silicone emulsion coating that provides superior release for a variety of "sticky" products such as hot asphalt. Because it is a one component release system, it eliminates mixing and leftover material disposal. This product is neither hot melt nor cold set gluable.
This product is one part of a two part silicone release coating. A catalyzed release coat system offers superior release and in most cases FDA compliance. This system is not gluable.
Release Coat® P1 HS is one part of a two part silicone release coating. A catalyzed release coat system offers superior release and in most cases FDA compliance. This system is not gluable.
Developed for use on corrugated, solid fiber and other forms of paper board packaging, this vapor corrosion inhibitor protects ferrous metals. This product is both hot melt and cold set gluable.
RustBan® 110 is a corrosion resistant skin pack chemical for paper and paperboard for ferrous metal packaging.
Developed for use on corrugated, solid fiber and other forms of paper board packaging this vapor corrosion inhibitor protects both ferrous and nonferous metals. It is both hot melt and cold set gluable.
Effective for slip or tier sheets as well as decorative packaging, this gluable nonskid coating also has the added benefit of good scuff and water resistance, oil resistance and a "leather like" feel.
Offers high slide angle to minimize slippage of packaging materials during transport.
Often used on slip/tier sheets or a variety of other applications that require a high COF surface this excellent nonskid coating also has a fair amount of water resistance.
A coating which provides water and grease resistance and excellent MVTR properties on kraft liner and other substrates. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coating applications, poly-laminated board and plastic bags.
Designed primarily for MVTR, this product also provides water resistance and some oil and grease resistance. It is gluable with both cold set and hot melt adhesives and is printable with water based inks.
Contact Michelman for more information or to request a sample.