Based on your search, these items may improve the performance of your products. To discuss the details of your specific application or project, please contact us.

All products are shown below.

Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® Gloss 310: Used over HP Indigo Electroinks® it gives protection to the ink when used in form, fill and seal packaging applications. It offers good slip allowing easy feed of the coated web and is resistant to heat from the heat sealing operation. It can be used in food packaging as a protective overprint varnish.

JetPrime (more info)

  • JetPrime® UV 100: Provides improved adhesion and print quality when printing with UV Inkjet on paper substrates, particularly for wine labels, coated and uncoated paper and direct thermal paper. This primer improves hold out, reduces bleed and mottle, and makes colors more vibrant.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 19815 Emulsion Maleated Polypropylene Anionic / Nonionic
Michem® Emulsion 66035 Emulsion Paraffin / Polyethylene Wax blend Anionic

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 135 Emulsion Paraffin / Polyethylene Wax blend Anionic

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® K 6002 Specialty Dispersion Functionally modified polymeric dispersion Ammoniated / alkali dispersion

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90001 Emulsion Paraffin / Polyethylene Wax blend Anionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® Toner Imprintable 6000: An acrylic-based aqueous coating for application over HP Indigo digital ink (sizing dependent) printed on paper and paperboard substrates. This product can be evaluated over waterbased ink jet inks.

Michem Coat (more info)

  • Michem® Coat 40 Plus N: A water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.
Additives & Modifiers:

Michem Glide (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Glide 37 Dispersion PTFE Nonionic

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 160 PFP Emulsion Carnauba Anionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® PA845 Dispersion Polyamide Anionic

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90009 Emulsion High Density Polyethylene Nonionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV 2150: A benzophenone free high gloss UV coating for application over hybrid or UV inks on paper, paperboard and select plastic stocks.
  • DigiGuard® UV 2200: A satin UV coating for application in-line over HP Indigo, UV litho, UV flexo and aqueous flexo ink systems.

DigiPrime (more info)

  • DigiPrime® 6611: When used for off-line optimizing of paper and synthetic or film, offers improved adhesion properties on certain synthetics, with less need for corona compared to the offline primer DigiPrime® 4431. DigiPrime® 6611 primed surfaces may have a limited shelf life. Typical shelf life is up to 8 weeks but shelf life should be established for each substrate surface and application.

Michem Flex (more info)

  • Michem® Flex Barrier 3510: A transparent high oxygen barrier water-based coating designed primarily for polyolefin materials. It is more durable and can withstand fracturing and pinholes compared to traditional barrier coatings. It can also be combined with metallization processes as a protective oxygen barrier coating.
Additives & Modifiers:

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® E 00001 Specialty Dispersion Polyolefin Acrylic hybrid Ammoniated dispersion
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV CR: A highly cross linked, high rub resistant UV coating recommended for use in-line over HP Indigo or UV ink systems and recommended to meet the stringent requirements of corrugated liquor packaging.
Polymers:

Licomer (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Licomer® M 36 Polymer Dispersion Styrene/Acrylic copolymer Anionic
Formulated Coatings:

DigiPrime (more info)

  • DigiPrime® 2000: This flexo and gravure ready product provides excellent adhesion of Indigo inks to uncoated, mottled, semi-gloss and glossy paper grades. It also improves the rub resistance of Indigo inks and does not yellow with time.
Polymers:

Ecrothan (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Ecrothan® 2012 Emulsion Polyurethane Acrylic hybrid Anionic
Formulated Coatings:

Michem Coat (more info)

  • Michem® Coat 51: An oil and grease resistant coating that also imparts good water resistance. It is printable and gluable with cold set and hot melt adhesives.
Additives & Modifiers:

Michem Guard (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Guard 7140 Dispersion Polyethylene Anionic
Polymers:

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® EP876 Dispersion Epoxy Resin Nonionic
Formulated Coatings:

Michem In-Line Primer (more info)

  • Michem® Clean 1188: The recommended cleaning solution for Michem® In-Line Primer 030 and 040 priming solutions, this product should be added to the cleaning tank of the in-line priming unit.

Michem Flex (more info)

  • Michem® Flex P1853R: Promotes excellent adhesion to extrusion coated resins for metal and paper substrates, resulting in exceptionally high bond strength with good water resistance.
  • Michem® Flex P1855: Michem® Flex P1855 is a primer for film, metal, and paper substrates to promote superior adhesion to extrusion coated resins. This product exhibits weatherability, and water and chemical resistance to many aggressive package contents such as water, oil, flavors, and fragrances. This product is also suitable for resins extruded at low temperatures.
Additives & Modifiers:

Michem Guard (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Guard 349 Dispersion Polyethylene Nonionic
Formulated Coatings:

Coating X300 (more info)

  • Coating X300™ AF: Provides high levels of water resistance and good moisture resistance for kraft paper. It protects food products from excessive moisture, freezer burn, and sticking. When diluted for mill application, it is an economical sizing agent. Gluability with hot melt adhesives is excellent, but cold set gluing is not recommended.

CleanGrip (more info)

  • CleanGrip® 2100: Silica based sprayable nonskid coating that provides excellent slide angles, is easy to clean and is gluable with hot melt and cold set adhesives.

DigiGuard (more info)

  • DigiGuard® 901 UV OPV Strengthener: An additive designed to improve the performance of HP-validated UV OPVs used in combination with DigiPrime® 680 or DigiPrime® 050 for Pack Ready for Labels. These OPVs are designated in the HP Indigo Pack Ready for Labels guideline.
Polymers:

Ecrothan (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Ecrothan® 2020 Dispersion Polyurethane Acrylic hybrid Anionic
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 42035A Emulsion Maleated Polypropylene Cationic/ Nonionic
Formulated Coatings:

Nomar (more info)

  • Nomar® 73: Provides very good abrasion protection for enamel coated metal surfaces, as well as many plastic surfaces. It is gluable with cold set and hot melt adhesives.
Additives & Modifiers:

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U7-01 Dispersion Polyurethane Anionic / Nonionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® Gloss 115: Provides good resistance to heat and a low coefficient of friction as an overprint varnish. It has good adhesion to most packaging films and inks and can help protect the print from damage. It can be used in demanding applications where ease of slip over hot surfaces is required - for example in vertical form, fill and seal packaging.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 95535 Emulsion High Density Polyethylene Nonionic

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® S 2001 Emulsion Natural wax Anionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV 3000: A highly cross linked, high rub resistant UV coating recommended for use in-line over HP Indigo and R[12]CUV ink systems.
Polymers:

Ecrothan (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Ecrothan® 4075 Dispersion Polyurethane Anionic
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 48625M1 Solution Reactive Copolymer N/A
Michem® Emulsion 91240G Emulsion Polyethylene Nonionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex HS9020: A water-based heat seal coating designed for heat sealing with polyolefin materials over a wide temperature range. It is excellent for sealing through contamination and ideal for horizontal and vertical form fill seal applications utilizing polyolefin materials that require high speeds, have temperature sensitive products, or have products that can contaminate seal areas. Michem® Flex HS9020 has a low seal initiation temperature for improved hot tack performance.
Additives & Modifiers:

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90008 Dispersion Polyethylene Nonionic
ProHere® L 90013 Emulsion Fischer-Tropsch Nonionic
ProHere® L 90800 Dispersion PTFE Nonionic
Formulated Coatings:

SofTak (more info)

  • Softak® 126: Effective for slip or tier sheets as well as decorative packaging, this gluable nonskid coating also has the added benefit of good scuff and water resistance, oil resistance and a "leather like" feel.
Polymers:

Ecrothan (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Ecrothan® 440 Dispersion Polyurethane Anionic

Licomer (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Licomer® A 53 Polymer Dispersion Acrylic Anionic
Additives & Modifiers:

Michem Prime (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Prime 4990R Specialty Dispersion Ethylene Acrylic Acid Copolymer Ammoniated dispersion
Polymers:

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® U 10003 Dispersion Polyurethane Anionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® Matte 173: Delivers a matte finish, heat resistance and rub resistance when applied to digitally printed film.

Michem In-Line Primer (more info)

  • Michem® Indicator 001: Detects the presence of Michelman Primer treatments on dry coated substrates. When applied on dry surfaces which have been properly treated with Michelman Primer coatings, the indicator will change color from blue to yellow.
Additives & Modifiers:

Michem Prime (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Prime 4983-40R Specialty Dispersion Ethylene Acrylic Acid Copolymer Ammoniated dispersion

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® E 00002 Specialty Dispersion Polyolefin Acrylic hybrid Ammoniated / alkali dispersion
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV HR: A high gloss UV coating for application over challenging inks and substrates requiring maximum flexibility and low odor.
Polymers:

Ecrothan (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Ecrothan® 2022 Dispersion Polymeric Dispersion Anionic
Additives & Modifiers:

Michem Prime (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Prime 5931 Specialty Dispersion Proprietary N/A

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® PP2-01 Dispersion Maleated Polypropylene Anionic / Nonionic
Formulated Coatings:

CleanGrip (more info)

  • CleanGrip® 2103: A high solids sprayable nonskid coating that provides excellent slide angles, is easily cleanable and hot melt and cold set gluable.

DigiGuard (more info)

  • DigiGuard® Gloss 110: A high gloss, temperature resistant, water based overprint varnish which meets FDA food contact requirements.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 44730 Emulsion Ethylene Acrylic Acid Copolymer Nonionic
Michem® Emulsion 93135M Emulsion High Density Polyethylene Nonionic
Michem® Emulsion 93235 Emulsion High Density Polyethylene Nonionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV 2000: Designed to be applied in-line over UV or hybrid UV ink systems and aqueous or UV flexo ink and provides excellent gloss and adhesion to HP Indigo inks.
Polymers:

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® U 10002 Dispersion Polyurethane Acrylic hybrid Anionic
Additives & Modifiers:

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90700 Solvent Dispersion Carnauba

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 182 Emulsion Paraffin / Carnauba Wax blend Anionic
Michem® Lube 511 Emulsion Paraffin / Polyethylene Wax blend Anionic
Polymers:

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U2023 Specialty Dispersion Polyurethane Anionic / Nonionic
Formulated Coatings:

CleanGrip (more info)

  • CleanGrip® 150: CleanGrip® 150 is a silica based nonskid for multiwall bags and printed surfaces designed to reduce the slipperiness of shipping containers by providing excellent slide angles.
Additives & Modifiers:

FGLASS (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
FGLASS™ X35 Dispersion Maleated Polypropylene Anionic / Nonionic
Formulated Coatings:

Michem In-Line Primer (more info)

  • Michem® In-Line Primer 030: Imparts a print-receptive surface to most substrates to improve the ink transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available as options on both the WS6000 and WS6600 presses. The primer improves the surface of a wide range of paper substrates, both uncoated and clay-coated of various basis weights, as well as PSA label stocks with paper or polyolefin face-stocks, including textured papers and transparent labelstock. This product possesses good stability to light and is resistant to yellowing.
Additives & Modifiers:

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® E 00003 Specialty Dispersion Polyolefin Acrylic hybrid Ammoniated dispersion
Polymers:

Hydrosize Link (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® Link U470 Specialty Dispersion Synthetic polymer Anionic / Nonionic
Formulated Coatings:

CleanGrip (more info)

  • CleanGrip® 111: Alumina based, nonskid coating designed to reduce the slipperiness of shipping containers by providing excellent slide angles. With a low pH it does not resolubilize ink and can prevent ink smearing. This product is gluable with both hot melt and cold set glues.
Additives & Modifiers:

Michem Guard (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Guard 25 Dispersion Polyethylene Nonionic
Formulated Coatings:

Micryl (more info)

  • Micryl™ 766RN: A water and grease resistant coating that can also function as a heat resistant gloss overprint. In such applications, it can be applied to paper (non-clay coated), film or foil, either over or under glycol or wax-free inks. This product is gluable with cold set and hot melt adhesives.
Additives & Modifiers:

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 723 Emulsion Paraffin Nonionic
Formulated Coatings:

VaporCoat (more info)

  • VaporCoat® 2200R: A coating which provides water and grease resistance and excellent MVTR properties on kraft liner and other substrates. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coating applications, poly-laminated board and plastic bags.

DigiGuard (more info)

  • DigiGuard® UV 2100: A high gloss UV coating for application over HP Indigo, UV, heatset or sheet-fed inks on a variety of plastic stocks.

DigiPrime (more info)

  • DigiPrime® 4450: A ready to use primer which provides excellent adhesion of HP Indigo ElectroInks® to most films and papers. It has exceptional anti-block properties and can be used for two sided printing. It also has food contact approval.
  • DigiPrime® 5000: A print primer that provides excellent adhesion of HP Indigo ElectroInks® to treated films and paper. It adheres well to many synthetics including soft vinyl. This product is designed for automatic rotary screen printing and may also be applied via flexo and other methods.
Additives & Modifiers:

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® K 6001 Specialty Dispersion Functionally modified polymeric dispersion Ammoniated dispersion
Formulated Coatings:

Michem In-Line Primer (more info)

  • Michem® In-Line Primer Q4304A: Designed as a primer for HP Indigo substrates to render them compatible to ink. It can be used on coated papers on the in-line priming unit on the W3250 press.

DigiPrime (more info)

  • DigiPrime® 050: Imparts a print-receptive surface to film and metalized film substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo 20000 Digital Press. This product is suitable for food contact.

Michem In-Line Primer (more info)

  • Michem® In-Line Primer 040: Imparts a print-receptive surface to synthetic substrates to improve the ink transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available as options on both the WS6000 and WS6600 presses. The primer improves the surface of a wide range of synthetic substrates. This product possesses good stability to light and is resistant to yellowing.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 93335 Emulsion High Density Polyethylene Nonionic
Michem® Emulsion 98040M1 Emulsion Fischer-Tropsch Nonionic

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® E 00004 Specialty Dispersion Polyolefin Acrylic hybrid Ammoniated dispersion

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® PP247 Emulsion Maleated Polypropylene Anionic / Nonionic
Polymers:

Hydrosize Link (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® Link U480 Specialty Dispersion Synthetic polymer Anionic / Nonionic

Licomer (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Licomer® A 41 Polymer Dispersion Styrene/Acrylic copolymer Anionic
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 94340 Emulsion Maleated Polypropylene Anionic / Nonionic

Michem Prime (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Prime 2960 Specialty Dispersion Ethylene Acrylic Acid Copolymer Ammoniated dispersion
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV WR: A high gloss UV coating with great submersion water resistance when applied over HP Indigo, hybrid or UV inks on select plastic stocks.
Polymers:

Licomer (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Licomer® T 51 Polymer Dispersion Acrylic Anionic
Formulated Coatings:

Michem Coat (more info)

  • Michem® Coat 1548: A machine ready coating which imparts good water, grease and oil resistance to the substrate. This product has been specially developed for good grease resistance in folded areas.
Additives & Modifiers:

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 103DI Emulsion Polyethylene Anionic
Michem® Lube 160RPH Emulsion Carnauba
Michem® Lube 368 Emulsion Paraffin / Polyethylene Wax blend Anionic

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® K 6011 Emulsion Synthetic Wax Nonionic
Formulated Coatings:

Michem In-Line Primer (more info)

  • Michem® In-Line Primer Q4305A: Designed as a primer for HP Indigo substrates to render them compatible to ink. It can be used on uncoated paper substrates on the in-line priming unit on the W3250 press.

Sapphire (more info)

  • Sapphire 5.0: Designed as a primer for HP Indigo substrates to render them compatible to ink. It can be used on paper substrates.

RustBan (more info)

  • RustBan® 105: Developed for use on corrugated, solid fiber and other forms of paper board packaging, this vapor corrosion inhibitor protects ferrous metals. This product is both hot melt and cold set gluable.
  • RustBan® 110: RustBan® 110 is a corrosion resistant skin pack chemical for paper and paperboard for ferrous metal packaging.

Release Coat (more info)

  • Release Coat® P1: This product is one part of a two part silicone release coating. A catalyzed release coat system offers superior release and in most cases FDA compliance. This system is not gluable.

DigiGuard (more info)

  • DigiGuard® UV 2250: A general purpose matte UV coating that provides excellent rub resistance. It is specifically formulated for use over HP Indigo or select toner based inks and energy cure inks to be applied in-line or off-line via anilox coaters.

Michem In-Line Primer (more info)

  • Michem® In-Line Primer Q4324A: Designed as a primer for HP Indigo substrates to render them compatible to ink. It can be used on coated paper substrates on the in-line priming unit on the W7200 press.

RustBan (more info)

  • RustBan® 250: Developed for use on corrugated, solid fiber and other forms of paper board packaging this vapor corrosion inhibitor protects both ferrous and nonferous metals. It is both hot melt and cold set gluable.
Polymers:

Licomer (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Licomer® M 55 Polymer Dispersion Styrene/Acrylic copolymer Anionic / Nonionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex Barrier 3511: A water-based clear protective topcoating that provides good adhesion of vacuum metalized films to inks and laminating adhesives.
  • Michem® Flex P2312: A primer for film, metalized film, printed film, and paper substrates to promote excellent adhesion to extrusion coated resins resulting in high bond strength for dry and low moisture package contents. It creates very strong adhesion between treated film and PE extrudate. It may also be used on film substrates to promote adhesion to liquid top coats such as Michelman heat seal coatings and acrylic coatings.
Additives & Modifiers:

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 190 Emulsion High Density Polyethylene Anionic
Michem® Lube 693 Emulsion Paraffin / Polyethylene Wax blend Anionic
Michem® Lube 743 Emulsion Paraffin Nonionic

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90006 Emulsion Polyethylene Nonionic
ProHere® L 90011 Emulsion Polyethylene Nonionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U5-01 Dispersion Polyurethane Anionic / Nonionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV 3100: A low migration, high gloss UV coating formulated to be free of California Proposition 65 materials.
Additives & Modifiers:

FGLASS (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
FGLASS™ X91 Dispersion Ethylene Maleic Anhydride Copolymer N/A

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 743G Emulsion Paraffin Nonionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV 3200: A Benzophenone free satin UV coating for application over HP Indigo, hybrid or UV inks on paper, paperboard and select plastic stocks.

Michem Flex (more info)

  • Michem® Flex HS777: Michem® Flex HS777 is heat sealable and adheres to paper. It will then function as a heat seal to polyolefin surfaces and paper.
Additives & Modifiers:

Michem Wood Coating (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Wood Coating 75 Emulsion Proprietary Anionic
Formulated Coatings:

SofTak (more info)

  • Softak® 326: Often used on slip/tier sheets or a variety of other applications that require a high COF surface this excellent nonskid coating also has a fair amount of water resistance.
Additives & Modifiers:

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U2022 Dispersion Polyurethane Anionic / Nonionic
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV 3250: A Benzophenone free matte UV coating where high performance, low odor, low gloss and fast cure response are desired on paper and paperboard substrates.
Additives & Modifiers:

Hydrolube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrolube® 763 Dispersion Polymer N/A
Formulated Coatings:

HydraBan (more info)

  • HydraBan® 708: An economical, water based treatment for kraft paper that imparts a high degree of water repellency, and is printable and gluable. It can be applied at the wet end or dry end of the corrugator, or with an off-line treating operation.

MaxWhite (more info)

  • MaxWhite® 17: A white coating designed to offer excellent brightness before and after wax. This product is both hot melt and cold set gluable.
Additives & Modifiers:

NatureShield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NatureShield® 30 Emulsion Organic Anionic

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® S 2103 Emulsion Polyethylene Nonionic

U-Nyte (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
U-Nyte™ Set 201 Powder Epoxy Resin N/A
Formulated Coatings:

DigiGuard (more info)

  • DigiGuard® UV WR Matte: A matte UV coating with great submersion water resistance when applied over HP Indigo, hybrid or UV inks on select plastic stocks.
Additives & Modifiers:

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® K 6022 Emulsion Wax Anionic
Formulated Coatings:

DigiPrime (more info)

  • DigiPrime® 060: Imparts a print-receptive surface to paperboard and metalized paperboard substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo 30000 Digital Press.

Michem Flex (more info)

  • Michem® Flex M1203: A water-based matte finish overprint varnish for all polyolefin materials. This OPV allows brand owners to use polyolefin materials and create a paper look with a soft velvety texture. It can be applied in registration which allows for clear windows to highlight the product and/or for a mixture of gloss and matte finishes that can enhance overall shelf appeal.
Additives & Modifiers:

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® E 00005 Specialty Dispersion Polyolefin Acrylic hybrid Ammoniated dispersion
Formulated Coatings:

DigiPrime (more info)

  • DigiPrime® 1600: An additive for size press treatments or pigment coatings to optimize substrates for HP Indigo printability. At suggested addition rate, it shows reduced dryer can buildup and excellent runnability at the size press. This treatment provides improved HP Indigo Electroinks adhesion and superior blanket compatibility.
Additives & Modifiers:

Michem Dispersion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Dispersion 275P Solvent Dispersion Petroleum Derived Hydrocarbon

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 985 Emulsion Carnauba / Paraffin wax blend Anionic

Michem Prime (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Prime 4983R Specialty Dispersion Ethylene Acrylic Acid Copolymer N/A

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® U 10001 Dispersion Aliphatic Polyurethane Anionic / Nonionic
Formulated Coatings:

DigiPrime (more info)

  • DigiPrime® 2500: When added to size press treatments or pigment coatings this primer will optimize substrates for HP Indigo printability. It is slower drying and provides excellent adhesion of HP Indigo Electroinks® to paper.
  • DigiPrime® 3000: This product offers improved flexo press application for optimising paper for HP Indigo Electroinks®. It provides excellent adhesion of the inks to uncoated, semi-gloss, and glossy paper grades.
Additives & Modifiers:

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 743P Emulsion Paraffin Nonionic

Michem Wood Coating (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Wood Coating 44 Emulsion Proprietary Anionic

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90002 Emulsion Paraffin Nonionic
Formulated Coatings:

DigiPrime (more info)

  • DigiPrime® 4431: This patented flexo and gravure ready coating provides excellent adhesion of HP Indigo ElectroInks® to most films and papers. This product is suitable for food contact and is especially useful for flexible packaging applications as well as label production. When applied at the recommended coating weight, the optical properties of the substrate are minimally affected, so maintaining the original aspect of the substrate. This product possesses good stability to light and is resistant to yellowing.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 52137 Emulsion Polyethylene Nonionic
Formulated Coatings:

Micryl (more info)

  • Micryl™ 783: This heat resistant gloss overprint is also an excellent choice when a water and grease resistant coating is required and in-line coating is not possible. It imparts useful levels of gloss and ink protection. This product is gluable with both hot melt and cold set glues.
Additives & Modifiers:

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® PA874 Dispersion Polyamide Wax
Formulated Coatings:

Michem In-Line Primer (more info)

  • Michem® In-Line Primer Q4325A: Designed as a primer for HP Indigo substrates to render them compatible to ink. It can be used on uncoated paper substrates on the in-line priming unit on the W7200 press.

DigiPrime (more info)

  • DigiPrime® 4453: A water resistant primer for both HP Indigo Electroinks® and Xeikon Electrophotographic toners and provides excellent adhesion to most papers and films. It is suitable for food contact and is especially useful for flexible packaging applications, as well as label production.
Additives & Modifiers:

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® P 00902 Emulsion Ethylene Acrylic Acid Copolymer Anionic

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90102 Emulsion Microcrystalline Anionic
Formulated Coatings:

DigiPrime (more info)

  • DigiPrime® 4462: When used for off-line optimizing of paper and synthetic or film, offers improved water resistance compared to other offline primers such as DigiPrime® 6611 and DigiPrime® 4431. It also provides excellent adhesion of the inks to uncoated, semi-gloss, and glossy paper grades, as well as a wide variety of synthetic and film.
Additives & Modifiers:

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® HP-1632 Solution Polyimide N/A

Michem Wood Coating (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Wood Coating 50 Emulsion Proprietary Anionic
Formulated Coatings:

DigiPrime (more info)

  • DigiPrime® 680: Imparts a print-receptive surface to film and metalized film substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo WS6000 series Digital Press.

Michem Coat (more info)

  • Michem® Coat 55: An oil and grease resistant coating which also imparts good water resistance. It is printable and gluable with water based and hot melt adhesives.
Additives & Modifiers:

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90104 Emulsion Maleated Polypropylene Anionic / Nonionic
Formulated Coatings:

GlossCoat (more info)

  • GlossCoat™ 100 BL: This fully formulated, flexo appliable nonskid coating is designed for kraft, mottled and bleached substrates.
Additives & Modifiers:

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® HP3-02 Emulsion Phenoxy Dispersion Anionic / Nonionic
Formulated Coatings:

HydraBan (more info)

  • HydraBan® 1000AF: An economical water based treatment for kraft paper that imparts a high degree of water repellency and is both printable and gluable.
  • HydraBan® 410: Water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.
Additives & Modifiers:

Licomer (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Licomer® W 483 Emulsion Montan Nonionic
Formulated Coatings:

Michem Coat (more info)

  • Michem® Coat 95: A good multi-purpose coating that provides excellent water, oil and grease resistance. This product is heat sealable and cold set gluable as well.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 71152 Emulsion Scale Wax Anionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex 4915: Michem® Flex 4915 is a general purpose heat seal coating for bonding aluminum foil or paper to itself.
Additives & Modifiers:

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 160PF Emulsion Carnauba Anionic

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90900 Emulsion Carnauba Anionic
Formulated Coatings:

HydraBan (more info)

  • HydraBan® 420: A water based coating designed to provide good water beading and resistance to corrugated board while being cold set gluable with most adhesives.
Additives & Modifiers:

Michem Dispersion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Dispersion 91530 Specialty Dispersion Acrylic Resin

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 156 PFP Emulsion Carnauba Nonionic

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90901 Emulsion Carnauba Nonionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U8-02 Specialty Dispersion Polyurethane Anionic / Nonionic

FGLASS (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
FGLASS™ X48 Dispersion Maleated Polypropylene Anionic / Nonionic

Hydrolube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrolube® 480 Emulsion Microcrystalline Nonionic
Formulated Coatings:

HydraBan (more info)

  • HydraBan® 430: A water based dilutable coating designed to provide good water beading and repellence to paper substrates while being cold set gluable with most adhesives.
Additives & Modifiers:

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90902 Emulsion Carnauba Nonionic
Formulated Coatings:

ThermaGloss (more info)

  • ThermaGloss® 425FLT: A high heat resistant overprint which imparts a matte finish to preprint linerboard while eliminating picking and smearing of the inks through the hot plate section of the corrugator.
Additives & Modifiers:

Hydrolube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrolube® 723 Emulsion Paraffin Nonionic
Formulated Coatings:

Michem Bake (more info)

  • Michem® Bake 360: Michem® Bake 360 provides excellent barrier and release performance for bake-in applications of frozen or prepared foods. It is to be used as the topcoat in a double bump system that includes Michem® Coat 84 as the base coat. This system can be applied on kraft liner or folding carton stock.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 61335 Emulsion High Density Polyethylene Anionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U5-02 Dispersion Polyurethane Anionic / Nonionic
Formulated Coatings:

Michem Coat (more info)

  • Michem® Coat 218CI4 AFN: Michem® Coat 218CI4 AFN is a contact type corrosion inhibitor. It is used to protect electrical components, metal parts, and sensitive papers. It must come in direct contact with the corrodible surface in order to protect it. It is gluable with many water based and hot melt adhesives.
Additives & Modifiers:

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90103 Dispersion Polyethylene Nonionic

ACqua (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ACqua™ 240 Emulsion Ethylene Acrylic Acid Copolymer Anionic
Formulated Coatings:

Michem Coat (more info)

  • Michem® Coat 40HAFN: A versatile water resistant coating which is gluable with a wide range of water based and hot melt adhesives.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 67235 Emulsion High Density Polyethylene Nonionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® PP270 Emulsion Maleated Polypropylene Anionic / Nonionic
Formulated Coatings:

Release Coat (more info)

  • Release Coat® P1 HS: Release Coat® P1 HS is one part of a two part silicone release coating. A catalyzed release coat system offers superior release and in most cases FDA compliance. This system is not gluable.

Michem Coat (more info)

  • Michem® Coat 525: Designed for maximum oil and grease performance and may be applied by rod coater, flexo or size press. It is cold set gluable and approved for direct food contact.
Additives & Modifiers:

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 124 Emulsion Microcrystalline Anionic

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® E 00007 Specialty Dispersion Polyolefin Acrylic hybrid
Formulated Coatings:

Michem Coat (more info)

  • Michem® Coat 81: A repulpable, printable, and cold set gluable coating optimized for water resistance and intermediate MVTR protection. Common uses include packaging for produce and meats, or anywhere packaged goods require protection from water or moisture vapor. It can be used alone as a single bump, or can be an ideal base coat for other barrier-enhancing Michelman coatings.

Release Coat (more info)

  • Release Coat® 40: An easy-to-use one component silicone emulsion coating that provides superior release for a variety of "sticky" products such as hot asphalt. Because it is a one component release system, it eliminates mixing and leftover material disposal. This product is neither hot melt nor cold set gluable.

Michem Coat (more info)

  • Michem® Coat 90: Multipurpose barrier coating particularly suited for two-sided coating jobs due to its printable and cold set gluable qualities. The coating imparts excellent water resistance, very good MVTR protection, and good oil resistance. It resists blocking in hot, moist stacks of corrugated board, resulting in excellent dyne stability. Michem® Coat 90 may be used alone as a single bump, or as a basecoat for other barrier-enhancing Michelman coatings.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 24414 Emulsion Carnauba Anionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex R1924: An environmentally friendly primer that promotes print receptivity and adhesion of water-based and UV cured inks and coatings used in printing flexible packaging and labels. It improves ink adhesion on a variety of substrate materials including polyolefins, paper, and foil.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 34935 Emulsion Paraffin / Ethylene Acrylic Acid Copolymer blend Anionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex HS 268: Used for heat sealing or dry bond lamination applications, offering low temperature seal initiation and stronger bonds to paper, metal (foil or metalized surface), various primed films such as matt, pearlized cavitated BOPP or BOPET films. It should be used with the addition of a wax emulsion to control the coefficient of friction (typically 2 to 4% by weight) e.g. Michem® Lube 160 RPH.
Additives & Modifiers:

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 180 Emulsion Carnauba / Paraffin wax blend Anionic

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® S 2002 Emulsion Natural wax Nonionic

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90005 Emulsion High Density Polyethylene Nonionic
ProHere® L 90010 Emulsion High Density Polyethylene Nonionic
Formulated Coatings:

SofTak (more info)

  • SofTak® 201: SofTak® 201 offers high slide angle to minimize slippage of packaging materials during transport.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 71150 Emulsion Scale Wax Anionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex HS9010: A water-based heat seal coating designed for heat sealing with polyolefin materials over a wide temperature range. It is excellent for sealing through contamination and ideal for horizontal and vertical form fill seal applications utilizing polyolefin materials that require high speeds, have temperature sensitive products, or have products that can contaminate seal areas.
  • Michem® Flex P1309: A primer for film, metalized film, printed film and paper substrates promoting excellent adhesion to extrusion coated resins, resulting in high bond strength for dry and low moisture content products. Michem Flex P1309 creates very strong adhesion between treated film and PE and EVA extrudates.
Additives & Modifiers:

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90007 Dispersion Maleated Polypropylene Anionic / Nonionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex P1852: Promotes superior adhesion to extrusion coated resins for film, metal and paper substrates. This product exhibits weatherability, water and chemical resistance to many aggressive package contents such as water, oils, flavors and fragrances. This product is also suitable for resins extruded at low temperatures.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 72040 Emulsion Polyethylene Nonionic
Michem® Emulsion 93935 Emulsion High Density Polyethylene Nonionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex P1883: Primer for metal and paper substrates promoting good adhesion to extrusion coated resins resulting in strong bond strength as well as excellent water and chemical resistance. It may also be used as a low temperature heat seal coating for bonding aluminum foil to itself or to paper.
Additives & Modifiers:

Michem Prime (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Prime 6121 Specialty Dispersion Ethylene Acrylic Acid Copolymer N/A

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90101 Emulsion Microcrystalline Nonionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U9-01 Specialty Dispersion Formulated Polymer N/A

Wax Dispersion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Wax Dispersion 40 Solvent Dispersion Paraffin

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 62330 Emulsion Paraffin / Polyethylene Wax blend Anionic
Formulated Coatings:

Michem Flex (more info)

  • Michem® Flex P2300: Primer for film, metalized film, printed film, and paper substrates promoting excellent adhesion to extrusion coated resins resulting in high bond strength for dry and low moisture contents. It creates very strong adhesion between treated film and PE extrudate. It may also be used on film substrates to promote adhesion to liquid top coats such as Michelman heat seal coatings and acrylic coatings.
Additives & Modifiers:

Michem Lube (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Lube 270R Emulsion Paraffin / Polyethylene Wax blend Anionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® PP943 Emulsion Maleated Polypropylene Anionic / Nonionic
Formulated Coatings:

Release Coat (more info)

  • Release Coat® 30: A lower solids, economical, one component coating that provides superior release for a variety of "sticky" products such as hot asphalt. Because it is a one component release system, it eliminates mixing and leftover material disposal. This product is neither hot melt nor cold set gluable.
Additives & Modifiers:

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® I 13003 Specialty Dispersion Polyimide N/A
Formulated Coatings:

ThermaGloss (more info)

  • ThermaGloss® 463: A low odor, APEO free overprint varnish for applications in which printed/varnished liners must withstand the heat of corrugation. This product provides improved runnability at higher speeds, and improved gloss and heat resistance.
Additives & Modifiers:

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 41740 Emulsion Polyethylene Nonionic
Michem® Emulsion 71731MOD Emulsion Paraffin Anionic
Formulated Coatings:

Topaz (more info)

  • Topaz 17 Solution: A solvent based primer designed to be applied via screen printing on plastic sheets to make them print compatible with Indigo technology.
Additives & Modifiers:

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® K 6021 Emulsion Wax blend Anionic

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® E 00015 Specialty Dispersion Ethylene Acrylic Acid Copolymer Ammoniated dispersion
Formulated Coatings:

VaporCoat (more info)

  • VaporCoat® 851: Designed primarily for MVTR, this product also provides water resistance and some oil and grease resistance. It is gluable with both cold set and hot melt adhesives and is printable with water based inks.
Additives & Modifiers:

FGLASS (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
FGLASS™ X90 Solution Ethylene Maleic Anhydride Copolymer N/A

Licomer (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Licomer® W 11 Emulsion Polyethylene Anionic / Nonionic

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 48040M2 Emulsion Microcrystalline Nonionic
Michem® Emulsion 70750 Emulsion Scale Wax Anionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U1-03 Dispersion Polyurethane Anionic / Nonionic

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 91735 Emulsion Maleated Polypropylene Anionic / Nonionic

Michem Guard (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Guard 1350 Dispersion Polyethylene Nonionic

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90110 Emulsion Maleated Polypropylene Anionic / Nonionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U2-04 Specialty Dispersion Polyurethane Anionic / Nonionic

Michem Wood Coating (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Wood Coating 70 Low VOC Emulsion Proprietary Anionic

Hydrosize (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Hydrosize® U6-01 Solution Polyurethane Anionic / Nonionic

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 36840 Emulsion Paraffin / Polyethylene Wax blend Anionic

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® E 00006 Specialty Dispersion Polyolefin Acrylic hybrid Amine dispersed

Michem Emulsion (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
Michem® Emulsion 47950 Emulsion Paraffin Nonionic
Michem® Emulsion 51715 Emulsion Synthetic Wax blend Nonionic

NurtureYield (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
NurtureYield® K 6010 Emulsion Synthetic Wax Nonionic

ProHere (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® I 13001 Solution Polyimide N/A

ProHere L (more info)

Products Available Form Wax Type / Solids Type Emulsifier Type
ProHere® L 90904 Emulsion Carnauba Anionic
ProHere® L 90100 Emulsion High Density Polyethylene Anionic