Michem® Coat 95
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
A good multi-purpose coating that provides excellent water, oil and grease resistance. This product is heat sealable and cold set gluable as well.
Water and grease resistant, heat sealable coating
This product is used in many applications including the following:
|Food Service||heat seal, water resistance|
See more products recommended for Food Service.
These physical properties are typical but should not be considered specifications.
|pH||8 - 8.6|
|Brookfield Viscosity (cps, mPa·s)||250 - 650|
Site of Manufacture (and Product Code)
Michem®Coat 95 is designed to be flexo or gravure applicable. For use as a heat seal coating on paper at a dry coating weight between 4 - 6gsm is recommended. Typical sealing conditions are 140-200C, 4 bar pressure, 1 sec dwell time. EZ Cup Viscosity = 20 - 40seconds, #3 Cup.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.