Michem® Emulsion 42035A
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
This film former for fiberglass sizing formulations is used to reinforce polypropylene. It provides an excellent balance between mechanical properties and color and is suitable for sizings for chopped strands as well as for continuous fiber.
Cationic water based emulsion of polyolefin waxes.
This product is used in many applications including the following:
|Fiber Sizing||chopped strands|
See more products recommended for Fiber Sizing.
These physical properties are typical but should not be considered specifications.
|Appearance||Off-white to yellow liquid|
|pH||3.5 - 6.5|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||34.5 - 35.5|
|Recommended pH Range||<7|
|Specific Gravity||0.97 - 0.99|
|Brookfield Viscosity (cps, mPa·s)||<30|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.