Michem® Emulsion 52137
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
Provides lubricity and is effective as a high temperature mold release for metal dies.
Nonionic polyethylene emulsion
This product is used in many applications including the following:
|Die Lubes & Mold Releases||lubricity, mold release|
See more products recommended for Die Lubes & Mold Releases.
These physical properties are typical but should not be considered specifications.
|Appearance||Light yellow, translucent liquid|
|pH||8.5 - 9.5|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||36.5 - 37.5|
|Recommended pH Range||2 - 12|
|Specific Gravity||0.98 - 1.00|
|Brookfield Viscosity (cps, mPa·s)||100 max|
Site of Manufacture (and Product Code)
Avoid contact with eyes. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.