Michem® Emulsion 61335
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
Provides excellent slip and mar resistance and anti-blocking properties for can and coil applications. It is also used as a release and slip aid in adhesives and paper coatings.
Anionic polyethylene emulsion
This product is used in many applications including the following:
|Can & Coil||block resistance, lubricity, mar resistance|
See more products recommended for Can & Coil.
These physical properties are typical but should not be considered specifications.
|pH||9.7 - 10.7|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||34.5 - 35.5|
|Recommended pH Range||>7|
|Specific Gravity||0.99 - 1.01|
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Use personal protective equipment as required.