Michem® Lube 743
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
Exhibiting a high degree of water, block and mar resistance, and excellent compatibility, this product is used in many water based coating applications.
Nonionic paraffin wax emulsion
This product is used in many applications including the following:
|Inks||block resistance, mar resistance, rub resistance, water resistance|
|Overprint Varnishes||block resistance, mar resistance, water resistance|
|Thermal Transfer||mar resistance, release|
|Exterior Wood Protection||block resistance|
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Thermal Transfer.
See more products recommended for Exterior Wood Protection.
These physical properties are typical but should not be considered specifications.
|Appearance||White, low viscosity liquid|
|pH||6.0 - 7.5|
|Shelf Life (mo)||24|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||31.5 - 32.5|
|Specific Gravity||0.98 - 1.00|
|Brookfield Viscosity (cps, mPa·s)||<150|
Site of Manufacture (and Product Code)
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.