Release Coat® P1 HS
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
Release Coat® P1 HS is one part of a two part silicone release coating. A catalyzed release coat system offers superior release and in most cases FDA compliance. This system is not gluable.
Uncatalyzed portion of a two-part silicone release coating
This product is used in many applications including the following:
See more products recommended for Industrial.
These physical properties are typical but should not be considered specifications.
|Appearance||White, semi-viscous liquid|
|pH||3.0 - 6.0|
|Brookfield Viscosity (cps, mPa·s)||300 - 800|
Site of Manufacture (and Product Code)
Release Coat® P1 HS must be combined with Catalyst P1 before applying to a substrate. This product may be applied by rod or blade coater.
Handle in accordance with good industrial hygiene and safety practice.