Michem® Prime 4990R
Brand Family Overview
VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.See more VaporCoat products.
Provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings.
Ethylene acrylic acid dispersion
This product is used in many applications including the following:
|Cable & Cordage||adhesion promotion, heat seal, water resistance|
|Heat Seal Coatings||metal, Substrate - paper|
|Inks||adhesion promotion, chemical resistance|
|Overprint Varnishes||adhesion promotion, chemical resistance|
See more products recommended for Cable & Cordage.
See more products recommended for Heat Seal Coatings.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Thermal Transfer.
These physical properties are typical but should not be considered specifications.
|pH||7.8 - 8.8|
|Emulsifier Charge||Ammoniated dispersion|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||32.0 - 35.0|
|Recommended pH Range||>7|
|Specific Gravity||0.98 - 1.00|
|Brookfield Viscosity (cps, mPa·s)||200 - 850|
Site of Manufacture (and Product Code)
Handle in accordance with good industrial hygiene and safety practice.