Release Coat® 40

Release Coat Family Overview

Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable. Learn more about Release Coat »


An easy-to-use one component silicone emulsion coating that provides superior release for a variety of "sticky" products such as hot asphalt. Because it is a one component release system, it eliminates mixing and leftover material disposal. This product is neither hot melt nor cold set gluable.

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted

Physical Properties

AppearanceWhite, opaque liquid
pH10.4 – 11.4
Percent Non-Volatile38.0% – 42.0%
Brookfield Viscosity Range200 – 625
Spindle Number3

These physical properties are typical but should not be considered specifications.

Additional Information

Description: One component, water based release coating.

Handling: Avoid contact with eyes, skin and clothing. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.

Storage: Keep container tightly closed. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep from freezing

Shelf Life: 24 Months

Technical Data Sheet: Click here to download a Technical Data Sheet PDF for Release Coat® 40

Site(s) of Manufacture (and Product Code):

Cincinnati, OH, USA (RLC40)

Tuas, Singapore (RLC40.S)