Imparts a print-receptive surface to film and metalized film substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo WS6000 series Digital Press.
Primer for digital printing
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - Indigo ILP station, OEM - Indigo 8000, OEM - Indigo ws6000, Substrate - film|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|pH||9.5 - 11.5|
|Percent Non-Volatile||8.0 - 10.0|
|Brookfield Viscosity (cps, mPa·s)||8 - 25|
Site of Manufacture (and Product Code)
Used on Indigo WS6000 Digital Press. Clean up must be accomplished with soft water while the applicator roll is still damp. In case the primer dries, residue may be cleaned by scrubbing with soap and water. For hard residues, a mix of caustic solution might be used. Do not dilute.