Designed as a primer for HP Indigo substrates to render them compatible to ink. It can be used on paper substrates.
Primer for use with HP Indigo press.
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - flexo / gravure/ roll, OEM - Indigo ws10000, OEM - Indigo ws5000, OEM - Indigo ws7000, Substrate - paper|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|pH||10.4 - 11.4|
|Percent Non-Volatile||4.8 - 5.3|
Site of Manufacture (and Product Code)
Q4310A (Sapphire 5.0) can be applied via flexo or direct gravure systems. The recommended dry coat weight is 30 to 60 mg/m². Use our Sapphire Indicator Solution to check quality of the coating. The anilox should be kept turning at all times to avoid premature drying of the solution. Cleaning with warm water, IPA or slightly acidic water is recommended. ISO Cup Viscosity - #3 Cup 25-31 sec. Do not dilute.