Michem® Coat 81
Brand Family Overview
Michem® Coat water-based coatings are selected primarily for grease and oil resistance. Other benefits include water resistance, release, coldset gluability, hot melt gluability, recyclability, and compliance with specific food contact regulations.See more Michem Coat products.
A repulpable, printable, and cold set gluable coating optimized for water resistance and intermediate MVTR protection. Common uses include packaging for produce and meats, or anywhere packaged goods require protection from water or moisture vapor. It can be used alone as a single bump, or can be an ideal base coat for other barrier-enhancing Michelman coatings.
Water resistant coating with intermediate moisture barrier.
This product is used in many applications including the following:
See more products recommended for Perishables.
See more products recommended for Industrial.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 10.0|
|Brookfield Viscosity (cps, mPa·s)||400 - 800|
Site of Manufacture (and Product Code)
Michem® Coat 81 is best applied via off-line rod coater or in-line at the wet end of the corrugator. Dry end application is not recommended. Dilution is not recommended.
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.