Michem® Flex P1852
Promotes superior adhesion to extrusion coated resins for film, metal and paper substrates. This product exhibits weatherability, water and chemical resistance to many aggressive package contents such as water, oils, flavors and fragrances. This product is also suitable for resins extruded at low temperatures.
Water based primer for liquids and extrusion coated resins.
This product is used in many applications including the following:
|Extrusion Coating Primers||adhesion for film|
See more products recommended for Extrusion Coating Primers.
These physical properties are typical but should not be considered specifications.
|EZ Cup Viscosity (s)||23 - 25|
|pH||7.7 - 8.7|
|Shelf Life (mo)||24|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||32.0 - 34.0|
|Specific Gravity||1.01 - 1.03|
|Brookfield Viscosity (cps, mPa·s)||0 - 200|
Site of Manufacture (and Product Code)
Michem®Flex P1852 may be applied via flexo, gravure or smooth roll coater. Corona or flame treat substrates prior to priming and dry thoroughly with hot, circulating air. This product is best for in-line processes, as it may block in rewound rolls. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2. EZ Cup Viscosity - #2 Cup, 23 - 25 sec. This product is available in the Americas. Michem® Flex P1855 is the equivalent product for Europe and Asia.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.