Michem® Guard 1350
Brand Family Overview
Michem® Guard waterborne dispersions add optimum abrasion/mar resistance, and slip and block resistance without the use of solvents. Some also provide a matting effect for a more natural appearance.See more Michem Guard products.
Water based one micron dispersion which improves rub and abrasion resistance in pigmented and semi-gloss coatings, and inks and overprint varnishes at very low addition rates with little effect on gloss.
Nonionic dispersion of polyethylene wax
This product is used in many applications including the following:
|Inks||block resistance, rub resistance, scratch resistance|
|Overprint Varnishes||block resistance, matting, rub resistance, scratch resistance|
|Industrial Wood & Plastic||abrasion resistance, block resistance, matting, scratch resistance|
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Industrial Wood & Plastic.
These physical properties are typical but should not be considered specifications.
|pH||7.0 - 8.0|
|Percent Non-Volatile||49.5 - 50.5|
|Recommended pH Range||4 - 10|
|Brookfield Viscosity (cps, mPa·s)||<500|
Site of Manufacture (and Product Code)
Avoid contact with eyes. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.